Simplify bevel setup
Setting up bevel cuts on plasma cutting systems has been time consuming in the past. With new technology advancements, that is changing.
  • Reduce setup time to minutes instead of hours
  • Reduce scrap material by reducing the number of trials
  • Deliver consistent quality with bevel cut sequence recommendation
  • Add new angles with ease with embedded equations

Set up bevel cuts in minutes with True BevelTM.
Download white paper
Learn all about how you can set up True Bevel in your cutting operations.

Click here if you would like us to contact you about True Bevel.

Connect with us:    

21 Great Hollow Rd, PO Box 5010, Hanover, NH 03755 USA
An experienced bevel customer was asked to set up 3" square coupons with 1" mild steel, using their normal method. After more than an hour and 3 attempts, the customer was getting close and would have achieved a good result on the next adjustment.

Using True Bevel technology, the factory tested settings were adapted to their bevel mechanics, and the first part produced met the requirement in approximately 10 minutes.