Learn about new webinars

We are in the process of finalizing many more webinars for 2017. Fill out the form below to be notified when new webinars are added.
Built for Business Integrated Cutting Solutions
Introducing our 2017 webinar series!

We are excited to bring you a whole new line up of educational webinars for 2017. This year our cutting and software experts cover a range of topics from handheld air plasma to the most advanced plasma and software available today. Browse our offerings and sign up for the webinars that interest you below.


FEATURED WEBINAR
Free educational webinars from Hypertherm
ProNest CNC and EDGE Connect
Thursday, June 1

You can't access your offline CAM programming, now what? Learn to get SureCut outcomes using the ProNest CNC from the touchscreen interface of your EDGE Connect CNC.

ProNest integration with FabSuite
Thursday, May 4 at 2 p.m.

Eliminate manual work, synchronize your inventory, and enjoy the powerful features of Hypertherm's ProNest by integrating with FabSuite. We show you how.

Register now >
Choosing an air plasma system
Thursday, April 6 at 11 a.m. Eastern

Spending money on a system that doesn't meet your needs is no fun. Learn how to decipher system specifications and walk away with the right system for your particular situation.


Register now >
Metal marking with plasma
Thursday, March 2 at 11 a.m. Eastern

Add part numbers, score lines, and dimples for drilling with plasma. Learn how to make high quality marks on metal using a hand or mechanized torch and air or argon gas.

Register now >
UPCOMING WEBINARS
ProNest integration with STRUMIS
Thursday, March 16 at 11 a.m. Eastern

Learn how to reduce waste and maximize material efficiency during this webinar which focuses on how STRUMIS interacts with Hypertherm’s ProNest CAM nesting software

Register now >
Flush cutting
Thursday, March 23 at 2 p.m. Eastern

Cut closer to your base metal than ever before for less grinding and the ability to reuse metal attachments. We show you how in this webinar covering our new flush cutting process.

Register now >
Perfecting spot weld removal
Thursday, April 20 at

Forget drilling and grinding. Learn how to quickly and cost effectively use plasma to separate two pieces of metal without damaging the base metal layer.

Register now >
ProNest 2017 v. 12.1
Thursday, May 18 at 2 p.m. Eastern

One year after the introduction of ProNest 2017, our CAM Software engineers return with a host of added features and functionality based on your feedback. Join us for a look at what's new.


Register now >
Also watch our on-demand webinars by visiting the Learn tab at www.hypertherm.com.
Connect with us: